prepare                    
     Download spec FOR PREP, PRIME & FINISH

1. KNOW YOUR SURFACE

Cedar, Hardi-plank®, Trex®, Mahogany, Vinyl, Fir, Composites… today’s homes are constructed with a dizzying array of materials, all of which can be stained or painted. The trick is to find the Storm Stain finish that is right for the job. Your independent Storm Stain retailer is a great source of information.

2. LOSE THE LAYERS

Remove loose or flaking paint by scraping or sanding once you are sure that lead paint was not used previously. If using a clear or semi-transparent top-coat, remove all traces of the previous coating. Other steps may be necessary for damaged, weathered or otherwise compromised wood.

3. CLEANLINESS COUNTS

Thoroughly clean your deck or siding project using your favorite cleaner and a pressure washer. Be sure to remove any visible dirt, pollen, mold and mildew, rinse and then let the wood dry completely.

4. FAIR WEATHER FUN

It is best to stain when the surface temperature is 50 degrees or higher. Wait until the wood is completely dry after rain or once morning dew as evaporated before staining. Always paint or stain in the shade- direct sunlight can cause problems during application. 

 

prime  
                     
download spec FOR PREP, PRIME & FINISH

In many cases, Storm Stain Enduradeck Deck and Fence Primer or Trouble Shooter Primer for Storm Stain is an important step in a successful stain project. Storm Stain Primers should be used on bare wood, nail heads, wood knots and in spots where a previous coating has been removed. Storm Stain Primers are preferred by professionals because they provide the best adhesion and stain blocking of any primer on the market.

Trouble Shooter Primer for Storm Stain remains one of our most sought after products. It is engineered to block extractive tannin bleed. When Storm Stain Finishes are applied over Trouble Shooter primer, they grip the surface surface underneath, protecting the substrate from the elements.

Storm Stain Enduradeck Deck and Fence Primer was specially formulated to provide maximum adhesion to deck surfaces, stairs, railings and fences. This premium product penetrates deep into the wood surface to protect the fibers and adhere the final stain finish to the substrate.

Use Storm Stain Enduradeck Primer or Trouble Shooter Primer for Storm Stain on:             

New Wood	Wood Knots	Nail Heads	Oriented Strand Board
Trex®	Hard Woods	Hardi-Plank®	Previously Painted/ Stained Surfaces
Weathered Wood	Fypon®	Vinyl	Pressure Treated Wood
Cement Fiber Board MDO	Wood/PVC Composites

Consult your local Storm Stain retailer to find the best Storm Stain products for your specific project.

 

finish                       

Download spec FOR PREP, PRIME & FINISH

Get the look you love with Storm Stain.

SOLID:

Rich, opaque color that covers the grain completely but still allows the texture to remain.

Semi-Opaque:

More pigment than semi transparent but still allows some of the grain to show. The final result is somewhat dependent upon the wood characteristics.

Semi-Transparent:

Adds subtle color while allowing the natural wood grain and texture to show   through. The final result is dependent upon the wood characteristics.

Bleached Wood Semi-Transparent:

A specialty coating that provides a uniform bleached-wood gray appearance to new or slightly weathered wood. The final result is dependent upon the wood characteristics.

Hardwood Oil:

Translucent-toned, oil treatment that accentuates natural wood depth and patina. The final result is determined by the wood characteristics.

Clear:

No color added. Certain clears may provide a slight enhancement or ambering value as a part of protectant factor. The final result is determined by the wood characteristics.